<pre id="z8nfa"></pre>

<acronym id="z8nfa"><strong id="z8nfa"></strong></acronym><pre id="z8nfa"></pre>
<track id="z8nfa"></track>
  • <acronym id="z8nfa"><strong id="z8nfa"><listing id="z8nfa"></listing></strong></acronym>
  • 
    
    <p id="z8nfa"></p>
      鍍金池/ 教程/ Android/ 測試 - Testing
      依賴關系,Android 庫和多項目設置 - Dependencies,Android Libraries and Multi-
      要求 - Requirements
      構建變種版本 - Build Variants
      高級構建定制 - Advanced Build Customization
      測試 - Testing
      基本項目 - Basic Project
      簡介 - Introduction

      測試 - Testing

      構建一個測試程序已經被集成到應用項目中,沒有必要再專門建立一個測試項目。

      單元測試

      單元測試的支持被試驗性地添加到 1.1 版本中,請看 這頁。本章節剩余部分描述了可以在真機(或模擬器)上運行的 “instrumentation tests”,以及需要構建的獨立、測試性的 APK。

      基本知識和配置

      正如前面所提到的,緊鄰main _sourceSet_的就是androidTest sourceSet,默認路徑在src/androidTest/下。 在這個測試_sourceSet_中會構建一個使用Android測試框架,并且可以部署到設備上的測試apk來測試應用程序。這里面包含單元測試,集成測試,和后續UI自動化測試。 這個測試sourceSet不應該包含AndroidManifest.xml文件,因為這個文件會自動生成。

      下面這些值可能會在測試應用配置中使用到:

      • testPackageName
      • testInstrumentationRunner
      • testHandleProfiling
      • testfunctionalTest

      正如前面所看到的,這些配置在defaultConfig對象中配置:

          android {
              defaultConfig {
                  testPackageName "com.test.foo"
                  testInstrumentationRunner "android.test.InstrumentationTestRunner"
                  testHandleProfiling true
                  testFunctionalTest true
              }
          }

      在測試應用程序的manifest文件中,instrumentation節點的targetPackage屬性值會自動使用測試應用的package名稱設置,即使這個名稱是通過defaultConfig或者_Build Type_對象自定義的。這也是manifest文件需要自動生成的一個原因。

      另外,這個測試_sourceSet_也可以擁有自己的依賴。 默認情況下,應用程序和他的依賴會自動添加的測試應用的classpath中,但是也可以通過以下來擴展:

          dependencies {
              androidTestCompile 'com.google.guava:guava:11.0.2'
          }

      測試應用通過assembleTest task來構建。assembleTest不依賴于main中的assemble task,需要手動設置運行,不能自動運行。

      目前只有一個_Build Type_被測試。默認情況下是debug Build Type,但是這也可以通過以下自定義配置:

          android {
              ...
              testBuildType "staging"
          }

      運行測試

      正如前面提到的,標志性task connectedCheck要求一個連接的設備來啟動。 這個過程依賴于androidTest task,因此將會運行androidTest。這個task將會執行下面內容:

      • 確認應用和測試應用都被構建(依賴于assembleDebugassembleTest)。
      • 安裝這兩個應用。
      • 運行這些測試。
      • 卸載這兩個應用。

      如果有多于一個連接設備,那么所有測試都會同時運行在所有連接設備上。如果其中一個測試失敗,不管是哪一個設備算失敗。

      所有測試結果都被保存為XML文檔,路徑為:

          _build/androidTest-results_

      (這類似于JUnit的運行結果保存在build/test-results)

      同樣,這也可以自定義配置:

          android {
              ...
      
              testOptions {
                  resultsDir = "$project.buildDir/foo/results"
              }
          }

      這里的android.testOptions.resultsDir將由Project.file(String)獲得。

      測試 Android 庫

      測試Android庫項目的方法與應用項目的方法類似。

      唯一的不同在于整個庫(包括它的依賴)都是自動作為依賴庫被添加到測試應用中。結果就是測試APK不單只包含它的代碼,還包含了庫項目自己和庫的所有依賴。 庫的manifest被組合到測試應用的manifest中(作為一些項目引用這個庫的殼)。

      androidTest task的變改只是安裝(或者卸載)測試APK(因為沒有其它APK被安裝)。

      其它的部分都是類似的。

      測試報告

      當運行單元測試的時候,Gradle會輸出一份HTML格式的報告以方便查看結果。 Android plugin也是基于此,并且擴展了HTML報告文件,它將所有連接設備的報告都合并到一個文件里面。

      獨立項目

      一個項目將會自動生成測試運行。默認位置為:build/reports/androidTests

      這非常類似于JUnit的報告所在位置build/reports/tests,其它的報告通常位于build/reports/< plugin >/。

      這個路徑也可以通過以下方式自定義:

          android {
              ...
      
              testOptions {
                  reportDir = "$project.buildDir/foo/report"
              }
          }

      報告將會合并運行在不同設備上的測試結果。

      多項目報告

      在一個配置了多個應用或者多個庫項目的多項目里,當同時運行所有測試的時候,生成一個報告文件記錄所有的測試可能是非常有用的。

      為了實現這個目的,需要使用同一個依賴文件(譯注:指的是使用android gradle插件的依賴文件)中的另一個插件??梢酝ㄟ^以下方式添加:

          buildscript {
              repositories {
                  mavenCentral()
              }
      
              dependencies {
                  classpath 'com.android.tools.build:gradle:0.5.6'
              }
          }
      
          apply plugin: 'android-reporting'

      這必須添加到項目的根目錄下,例如與settings.gradle文件同個目錄的build.gradle文件中。

      之后,在命令行中導航到項目根目錄下,輸入以下命令就可以運行所有測試并合并所有報告:

          gradle deviceCheck mergeAndroidReports --continue

      注意:
      這里的--continue選項將允許所有測試,即使子項目中的任何一個運行失敗都不會停止。如果沒有這個選項,第一個失敗測試將會終止全部測試的運行,這可能導致一些項目沒有執行過它們的測試。

      Lint 支持

      Lint支持,譯者注:Lint是一個可以檢查Android項目中存在的問題的工具

      從0.7.0版本開始,你可以為項目中一個特定的Variant(變種)版本運行lint,也可以為所有Variant版本都運行lint。它將會生成一個報告描述哪一個Variant版本中存在著問題。

      你可以通過以下lint選項配置lint。通常情況下你只需要配置其中一部分,以下列出了所有可使用的選項:

          android {
              lintOptions {
                  // set to true to turn off analysis progress reporting by lint
                  quiet true
                  // if true, stop the gradle build if errors are found
                  abortOnError false
                  // if true, only report errors
                  ignoreWarnings true
                  // if true, emit full/absolute paths to files with errors (true by default)
                  //absolutePaths true
                  // if true, check all issues, including those that are off by default
                  checkAllWarnings true
                  // if true, treat all warnings as errors
                  warningsAsErrors true
                  // turn off checking the given issue id's
                  disable 'TypographyFractions','TypographyQuotes'
                  // turn on the given issue id's
                  enable 'RtlHardcoded','RtlCompat', 'RtlEnabled'
                  // check *only* the given issue id's
                  check 'NewApi', 'InlinedApi'
                  // if true, don't include source code lines in the error output
                  noLines true
                  // if true, show all locations for an error, do not truncate lists, etc.
                  showAll true
                  // Fallback lint configuration (default severities, etc.)
                  lintConfig file("default-lint.xml")
                  // if true, generate a text report of issues (false by default)
                  textReport true
                  // location to write the output; can be a file or 'stdout'
                  textOutput 'stdout'
                  // if true, generate an XML report for use by for example Jenkins
                  xmlReport false
                  // file to write report to (if not specified, defaults to lint-results.xml)
                  xmlOutput file("lint-report.xml")
                  // if true, generate an HTML report (with issue explanations, sourcecode, etc)
                  htmlReport true
                  // optional path to report (default will be lint-results.html in the builddir)
                  htmlOutput file("lint-report.html")
      
             // set to true to have all release builds run lint on issues with severity=fatal
             // and abort the build (controlled by abortOnError above) if fatal issues are found
             checkReleaseBuilds true
                  // Set the severity of the given issues to fatal (which means they will be
                  // checked during release builds (even if the lint target is not included)
                  fatal 'NewApi', 'InlineApi'
                  // Set the severity of the given issues to error
                  error 'Wakelock', 'TextViewEdits'
                  // Set the severity of the given issues to warning
                  warning 'ResourceAsColor'
                  // Set the severity of the given issues to ignore (same as disabling the check)
                  ignore 'TypographyQuotes'
              }
          }
      无码丰满熟妇一区二区蜜臀Av
      <pre id="z8nfa"></pre>

      <acronym id="z8nfa"><strong id="z8nfa"></strong></acronym><pre id="z8nfa"></pre>
      <track id="z8nfa"></track>
    1. <acronym id="z8nfa"><strong id="z8nfa"><listing id="z8nfa"></listing></strong></acronym>
    2. 
      
      <p id="z8nfa"></p>